Topology optimization for crashworthiness of thin-walled structures under axial crash considering nonlinear plastic buckling and locations of plastic hinges

Although topology optimization is established for linear static problems, more effort is required for solving nonlinear plastic problems. A new topology optimization approach with equivalent static loads (ESLs) is suggested to find the optimum topologies and locations of plastic hinges of thin-walled crash boxes by considering crash-induced deformation, the main crash energy-absorbing mechanism. Together with finite element method crashworthiness analyses, considering all nonlinearities with rate-dependent plasticity, the method was developed using an appropriate time-incremental scheme of ESLs without removing any high values of loads. Analyses show that the crash boxes with optimum topologies have energy-absorbing capabilities equivalent to the original structure. The proposed method is evaluated for two crashes: a crash box at low speed and a double cell subjected to high-speed collision. The results indicate that this method captures nonlinear crushing behaviours and accurate locations of plastic hinges where, if proper reinforcements are made, energy absorption can be enhanced.     

Toughness enhancement and equivalent initial fracture toughness of cementitious composite reinforced with aligned steel fibres

Based on theoretical analysis and numerical simulation, the impact of steel fibres on the stress intensity factor (SIF) at the crack tip for cementitious composite was studied. The enhanced toughness of steel fibre reinforced cementitious composite (SFRC) in resisting cracks was explained by the decrement of SIF caused by steel fibre inclusions at the crack tip of the composite. The equivalent initial fracture toughness was used to characterize the crack initiation of SFRC. A simplified method for determining the of SFRC was proposed based on a linear regression method. Fracture tests were conducted on three‐point bending notched beams with different steel fibre volume fractions and specimen sizes to study the crack initiation behaviour of aligned steel fibre reinforced cementitious composite (ASFRC). of ASFRC was calculated, and the size effect of was analysed. The results showed that slightly increased with the steel fibre volume fraction and gradually became stable. For the tested specimens, whose heights varied between 40 and 100 mm, the specimen size had little impact on the .     

基于一种改进逐点比较插补法的激光打标机控制加工算法

在激光打标系统中,逐点比较插补法是一种普遍使用的算法。这种算法在控制激光运动轨迹和对图像轨迹的拟合过程中,起到极其重要的作用。由于逐点比较插补法具有运算直观,脉冲输出均匀,调节方便等特点,所以是一种较为适合打标机系统应用的插补算法。但是传统的逐点比较插补算法存在精度低和速度慢等问题。为了改善该算法的性能,对传统逐点比较插补算法进行了改进,并进行了计算和模拟仿真。结果表明改进比较插补算法在精度和速度上都有明显提高。     

二甲双胍联合糖皮质激素治疗伴糖耐量异常的系统性红斑狼疮患者的临床研究

目的: 探究二甲双胍联合糖皮质激素治疗伴糖耐量异常(IGT)的系统性红斑狼疮(SLE)患者的临床疗效及对胰岛功能、Th17/Treg细胞失衡的影响。方法: 本院84例伴IGT的SLE患者随机分为联用组和对照组各42例,均给予生活、饮食指导,对照组给予糖皮质激素治疗,联用组联合二甲双胍治疗,1个月后观察疗效,并评估胰岛功能和Th17/Treg细胞失衡情况。结果: 联用组总有效率明显高于对照组(90.48% vs. 71.43%,P<0.05),SLE活动指数评分为(2.6±0.3)分,红细胞沉降率(ESR)为(18±4)mm/h,显著低于对照组的(3.9±0.8)分、(23±4)mm/h(P<0.05)。治疗后联用组空腹血糖(FBG)、空腹胰岛素(Fins)、稳态模型-胰岛素抵抗指数(HOMA-IR)、胰岛β功能细胞指数(HOMA-β)显著改善(P<0.05),且与对照组相比差异有统计学意义(P<0.05);联用组正常糖耐量(NGT)占比明显高于对照组(73.81% vs. 30.95%,P<0.05)。治疗后联用组Th17、Treg细胞比例为(6.2±0.9)个/μL、(31±7)个/μL,Th17/Treg为(0.20±0.05),与对照组的(7.4±1.3)个/μL、(28±7)个/μL、(0.26±0.06)相比有统计学差异(P<0.05)。治疗后SLE活动指数评分与HOMA-IR、HOMA-β及Th17细胞、Treg细胞、Th17/Treg明显相关(P<0.05),且HOMA-IR、HOMA-β与Th17细胞、Treg细胞、Th17/Treg也明显相关(P<0.05)。2组不良反应均轻微,发生率无统计学差异(P>0.05)。结论: 二甲双胍联合糖皮质激素治疗伴IGT的SLE患者疗效显著,可控制疾病活动性,降低血糖水平、改善胰岛功能及纠正Th17/Treg细胞失衡,且安全性高。     

分组空时块码系统中的排序最大信噪比检测算法

提出并比较了应用于分组空时块码（G—STBC）系统中两种不同信道模型的排序最大信噪比（MaxSNR）检测算法。该系统在发端对发射天线分组，每组进行独立的空时块码编码；在收端应用排序最大信噪比算法进行检测。由于空时块码提供了额外的时域约束，所以可以利用这个约束对信道模型进行变换，得到一个等效信道模型，然后再使用排序MaxSNR检测；当然也可以直接利用原有的信道模型，即非等效信道模型进行检测。仿真结果表明：当接收天线数不少于发射天线数的一半时，采用等效信道模型下的排序MaxSNR算法，系统的误码曲线就能保持陡降性；并且在收发天线数相同时，其性能总是优于非等效信道模型。     

超宽带极窄脉冲设计与产生

超宽带(UWB)技术是以持续时间极短的脉冲作为传输载体进行数据通信的无线新技术。基于BJT雪崩特性,本文采用并行同时触发的工作方式,设计并产生了高重复速率的UWB脉冲电路发生器,极大地减少了时延,缩短了上升时间,提高了脉冲的幅度,并从等效电路法的观点分析计算了脉冲的特性参数,理论结果与实测结果具有较好的一致性。     

交通平衡分配下的公路桥收费策略

假定一个城市被一条河流分为两部分（如我国的武汉，重庆等市），河上至少架设了两座公路桥梁，本文研究在交通平衡状态下，怎样制定车辆过桥梁的收费水平，使获得的总收入最大，乘客的总行驶时间最少，对多车种问题，研究了等价的数学模型和算法。还对一个含两座桥梁与三种车型的简单算例，进行了计算与分析。     

点阴极电场辅助阳极连接中的紧密接触面积和电流

用等效电路的方法研究了点阴极情况下的电场辅助阳极连接效应，计算了连接电流，连接孕育期和紧密接触面积，本文结果表明，连接初期电流迅速衰减，随后缓慢变小，直至某一稳定值，孕育期随温度上升指数下降，连接温度高时，孕育期将难以观察到；待连接表面之间紧密接触面积随时间延长而非线性扩展，紧密接触区域增大时，其边界向外推进速度渐小，而接触面积增加渐快。     

碾压混凝土穿透型诱导缝不同扩展阶段的强度指标试验研究

在不同削弱度碾压混凝土轴拉试件的穿透型诱导缝周围粘贴了应变片，得到在不同应力状态下诱导缝应变发展规律为：在加载初期，离缝端不同距离的应变发展较为均匀，数值上相差不突出；随着荷载的增加，应变开始出现不均匀发展，离缝端越远，应变变化越缓慢；当接近最大荷载的阶段，缝端应变急速发展，试件瞬间断裂。应变从均匀发展变为不均匀发展，实质上隐含了诱导缝起裂、稳定发展、失稳断裂的整个过程，针对这一试验现象，结合断裂力学理论，建立了诱导缝不同开裂阶段的远场温度应力强度指标模型。     

Observer design for autonomous discrete-time nonlinear systems

We obtain a necessary and sufficient condition for a discrete-time nonlinear system to be locally state equivalent to the nonlinear observer form. The result looks similar to the continuous counterpart except for the fact that Ad-operation is utilized instead of ad-operation.